
| |
[ Home ] [ Up ]
[ Back ] [ Next ] 
SOUNDHOLE MICROPHONES by GHS
NOTE: for professional level soundhole microphones
check out the MiniFlex 2Mic here.
Soundhole microphones suspend a gooseneck mounted mic inside the instrument, and
provide the most accurate and realistic sound reproduction of any on-board amplification
device or pickup. Models are available for guitar, and other instruments (inquire
by contacting us via email). The gooseneck permits positioning
the mic in a variety of locations inside the instrument for the best possible sound. Many
of the models include a "stereo option", which permits wiring a pickup (piezo
or magnetic) to the Soundhole mic for simultaneous use via a single output jack.
Key Features
 | low impedance condenser microphones for reproducing true acoustic
character of stringed instruments (High quality low impedance (10,000 ohm) output signal.
Frequency response of 100-15000 Hz) |
 | Patented gooseneck design to allow for flexible microphone placement and proper
shock mounting |
 | Comes standard with internal battery and power supply located on the microphone
assembly. Special non-battery models also are available for use with either low
voltage "phantom power" (max. 9v). |
 | Several different models for different budgets are offered |
NOTE: FOR ADDITIONAL ACCESSORIES AND
ATTACHMENT DEVICES FOR OTHER INSTRUMENTS SEE BELOW:
Guitar
Mics - Internal Soundhole
internal model
depicted
For maximum performance, we suggest using
a special Low Impedance Miniflex Cable (1/4" male phone plug to XLR 3-pin male plug).
SEE BELOW
- Model A137
GHS ACOUSTIC SOUNDHOLE MIC
(internal mount)

|
Description:
miniature condenser
microphone attached to a thin gooseneck with 1/4" mono endpin jack, which is mounted
inside the instrument. Mic is unidirectional to minimize feedback.
For maximum performance, we suggest using a special
Low Impedance Miniflex Cable (1/4" male phone plug to XLR 3-pin male plug).
|
NO LONGER AVAILABLE
ITEM DISCONTINUED BY MANUFACTURER |
|
|
|
Model A131
- GHS ACOUSTIC SOUNDHOLE MIC
(external mount)
-

|
Cardiod microphone is mounted at the end of a 5"
gooseneck. Unit clips to the edge of the soundhole. Mic head may be positioned inside the
guitar or outside, as the player deems most satisfactory. Mic
is powered by 1 AA battery (battery life ~1 year). High quality low impedance (10,000 ohm)
output signal. Frequency response of 100-15000 Hz.. For
maximum performance, we suggest using a special Low Impedance Miniflex Cable (1/4"
male phone plug to XLR 3-pin male plug). |
$64.99 (list price
$99.50)
[ORDER] |
Model A133
GHS ACOUSTIC SOUNDHOLE MIC w/ VOLUME CONTROL (external
mount) 
|
Cardiod Mic. Similar to model A131 above
but with volume control built-in to the battery box / jack. Mic is powered by
1 AA battery (battery life ~1 year). High quality low impedance (10,000 ohm) output
signal. Frequency response of 100-15000 Hz. For
maximum performance, we suggest using a special Low Impedance Miniflex Cable (1/4"
male phone plug to XLR 3-pin male plug). |
$79.99
(list price $109.50)
[ORDER] |

GHS ATTACHMENT DEVICES & OTHER
ACCESSORIES
Model EA1 |
Short elastic mic attachment device (for drums,
etc.) |
$17.50 [ORDER] |
Model EA2 |
Medium elastic mic attachment device (for drums,
etc.) |
$17.95 [ORDER] |
Model EA3 |
Long elastic mic attachment device (for drums,
etc.) |
$18.50 [ORDER] |
Model BA1 |
Banjo attachment device |
$17.50 [ORDER] |
Model CA1 |
Clip attachment /small (ideal for horns) |
$24.95 [ORDER] |
Model CA2 |
Clip attachment /large (ideal for flutes) |
$29.95 [ORDER] |
Model SHMC -15BK |
15-ft HiZ mic cable for soundhole mic |
$28.00 [ORDER] |
Model PR1 |
Power reamer tool for internal mic installation |
$14.95 [ORDER] |
Model VP1 |
Velcro Patch (2 patches/order) |
$12.00 [ORDER] |

Specialty Cables for
MiniFlex Products: note: these cables are
not required to use these products, however their ability to adapt the low impedance mics
to a low impedance XLR input will enhance the output signal.
CAUTION: DO NOT USE THESE CABLES WITH
PHANTOM POWER EXCEPT FOR WITH MODEL 139B !! |

SHMC-15BK (SPC-1)
$28.00
SHMC15BK
XLR to standard 1/4" male. 15 feet long. Pin 2 is hot. Works with all our mics.
[ORDER]

|
SPC-2
(NO PICTURE)
$29.50
SPC2
Lightweight 12 foot cable, XLR to right-angle plug 1/4" male. We highly
recommend this cable for violins and mandolin fitted with low impedance microphones
(similar to SPC-6, below but thinner cable)
[ORDER]

|
SPC-6
$29.50
ACPC6
XLR to right-angle plug 1/4" male. 15 feet long. Pin 2 is hot. (Same as PC-1 except
one end right-angle).
[ORDER]
email: info@acousticon.com |

SPC-3 (NO PICTURE)
$32.50
ACPC3
USE THIS CABLE FOR A PICKUP/MICROPHONE COMBINATION SETUP
Stereo Y cable - Stereo plug one end, 15 foot long trunk, two 3 foot long ends with plugs,
Y ends terminate in one 1/4" plug (high impedance) and one male XLR (low impedance)
plug.
[ORDER] |

|
SPC-4
$32.50
ACPC4
Stereo Y cable - Stereo plug one end, 15 foot long trunk, two 3 foot long ends with plugs,
Y ends terminate in two 1/4" plugs
(FOR DUAL HIGH IMPEDANCE PICKUP SETUPS)
[ORDER] |

|